ctheroux.com

20 mm wide 135 Degrees T-Slot Angle Brackets

July 7, 2019 · admin 3D Printing object

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets.

Editing Extra large 20x4 LCD Project Box

June 30, 2019 · admin 3D Printing object

This is a project box for a large 20 x 4 LCD display. The LCD module dimensions are 146mm x 62.5mm x 20mm (5.75 inches x 2.46 inches x 0.79 inches). The viewing area is 123mm x 43mm (4.86 inches x 1.69 inches). The character size is 9.65mm x 4.57mm (0.38 inches x 0.18 inches).

Prusa i3 X-Axis Leveling Tool

May 26, 2019 · admin 3D Printing object

This is a simple tool that will help you level the X-axis of a Prusa i3. You will need to print two of this. You can use them either sitting on the Z frame or the Z motor mounts. On the main picture, they are sitting on the motor mounts. I have lowered the X-axis manually until both tools touch the lower rod of the X-axis.

Jetson Nano Base with Camera

May 20, 2019 · admin 3D Printing object

This is a simple base plate for the NVidia Jetson Nano development board along with a Raspberry PI v2.1 camera holder. It can be tilted and panned. To assemble it, you will need:

EPM240 CPLD Development Board Base Plate

May 5, 2019 · admin 3D Printing object

This is a base plate for the Altera Max II EPM240 CPLD Development Board from LC Technologies. You will need 4 M2 x 4mm screws to assemble it.

Jetson Nano Base Plate

April 19, 2019 · admin 3D Printing object

This is a simple base plate for the NVidia Jetson Nano development board. 4 x #4-40, 1/4" bolts are required to assemble it.

Parametric Bottle Rack

March 17, 2019 · admin 3D Printing object

This is a simple SCAD file that generates bottle rack. Various sizes are included. To create a custom one:

Parametric Drink Coaster

March 10, 2019 · admin 3D Printing object

This is a simple SCAD file that generates round coaster. Various sizes are included. To create a custom one:

Ivar Cable Hanger

March 2, 2019 · admin 3D Printing object

This is a cable hanger to be installed on the side unit of the Ivar shelving system. You will need 2 #4-40, 1/2" bolts and the matching nuts.

Business Card Holder

February 23, 2019 · admin 3D Printing object

This is a simple business card holder that can be hang on a 5 mm wide support. It can hold about 50 cards.

Tags