Hue Motion Sentor Cover
May 24, 2026
· admin
3D Printing
object
This is a cover for the Philips Hue Motion Sensor designed to prevent it from triggering.
Parametric Shelf Bracket
April 18, 2026
· admin
3D Printing
object
This is a light-duty parametric shelf bracket. It occupies minimal vertical and horizontal space. However, it does not support as much weight as heavier-duty designs. You will need appropriate hardware—such as screws and drywall anchors (gypsum plugs) - to mount it securely to the wall.
TimmerFlotte Holder for Ikea Ivar Shelving
March 21, 2026
· admin
3D Printing
object
This is a holder to mount a TimmerFlotte sensor on an Ikea Ivar ladder. No screws are needed.
Parametric Ikea Skadis Vertical Cylinders
March 1, 2026
· admin
3D Printing
object
Dual vertical cylinder for the Ikea Skadis perforated board. This is a parametric design. The hooks can be glued to the cylinder body if required.
Parametric Dowel Bracket
January 18, 2026
· admin
3D Printing
object
This is a parametric dowel bracket. The screw holders are printed separately to prevent the bracket from splitting if the screws are overtightened.
Led and Zener Diode Tester
January 3, 2026
· admin
3D Printing
object
This device displays the forward voltage of an LED or Zener diode. Assembly is straightforward—use the included wiring diagram for reference.
Ikea Kallax Bracket for Skadis Peg Board
December 28, 2025
· admin
3D Printing
object
These brackets attach to IKEA Kallax shelving units and provide a secure way to mount a Skadis pegboard on the sides. Two M4 nuts are required.
Ikea Skadis Dewalt Medium Tough Case Mount
December 24, 2025
· admin
3D Printing
object
This is a device to attach a Dewalt Medium Tough Case on an Ikea Skadis. It is recommended to glue the Skadis hooks to the main body with some glue.
Parametric Skadis Tool Holder Ring
December 13, 2025
· admin
3D Printing
object
This is a parametric Skadis tool holder ring generator. It is recommended to glue the Skadis pins to the main body. Take note that the model generation may take up to a minute.
Parametric Skadis Comb Style Holder
December 6, 2025
· admin
3D Printing
object
This is a parametric Skadis comb-style Holder. The example shown is designed for six screwdrivers, but it can be customized for any number and size of objects, with each slot adjusted independently.