This is a case for the White Noise Generator kit https://www.aliexpress.com/item/32842450015.html?spm=a2g0o.order\_list.0.0.79b518023Tw819 .

This is a storage box for a single Revo Nozzle.

These openSCAD parametric object generates bits and blades holders for the DeWalt Tough Cases.It can generate horizontal hexagonal bit holders, arbitrary angled hexagonal bit holders along with T-blade Jigsaw blade holders. Many parameters are available to customize the holders including but not limited to the width of the holder, the number of bits it can hold based on the width of each bit, the thickness of the blades, and so on.Some STL file examples are provided. You can select to generate various test objects at the beginning of each script prior to printing a complete one in order to adjust the clearance if needed.Comments are given in the script for each parameter. Make sure that the script DeWaltLibrary.scad is in the same folder as the other scripts.These designs are inspired by the designs of Benjamen Johnson (https://www.thingiverse.com/benjamenjohnson/designs).Printed with TPU gives better results. Nevertheless, they can be printer in any material. Support material is not required. An infill of 20% is recommended.

This is the version 2 of a simple guide that strengthen the PTFE tube at the extruder output of a TronXY X5SA printer. You will need a M4 x 12 mm screw along with a M4 T-nut.

This is a parametric tray generator for Wera micro screwdrivers. The trays are optionally stackable. The STL are given as a basic set of trays. You may generate trays for an arbitrary number of screwdrivers.

figure class="wp-block-table">

This script creates a square drilling template. It was mainly designed to generate drilling templates for power bars since they are often install in awkward places and marking the drilling hole is difficult.

This is a simple case for an Altec Lansing Baby Boom XL Case bluetooth speaker.

This is a simple emergency switch holder for a 3018 CNC. The diameter of the hole for the switch is 13 mm. The normally open switch can be connected on the Z limit switch connector on the control board.

This is a 100 mm high cotton pad container. The cotton pad container has a diameter of a bit less than 60 mm.