100 mm Zip Tie Container
July 22, 2022
· admin
3D Printing
object
This is a 100 mm Zip Tie Container. It can contain more than 500 zip ties. It is divided in 10 compartments.
Small flashlight holder
July 16, 2022
· admin
3D Printing
object
This is a small flashlight holder that can be screwed on a wall and so on. It is specifically design for a Police Security 3 cubs flashlight.
Ikea Ivar tool holder
July 9, 2022
· admin
3D Printing
object
This is a tool holder designed to be hung on the side unit of the Ikea Ivar shelving system.
3DTouch CR-10/Ender-3 Mounting Bracket
July 2, 2022
· admin
3D Printing
object
This is a bracket to mount a 3DTouch on a CR-10 or an Ender 3 printer.
USB Type A breakout board case
June 25, 2022
· admin
3D Printing
object
This is a case for a USB Type A breakout board. The size of the PCB is 15 mm x 15 mm. You'll need a drop of glue to attach the cover to the main body.
Ikea Skogsta Inner Buckets
June 18, 2022
· admin
3D Printing
object
These are buckets for the Ikea Skogsta tool box. They were design for my own needs. I designed them to store my various pliers vertically. Nevertheless, they can be useful for anyone.
Parametric Small Part Trays
June 11, 2022
· admin
3D Printing
object
These openScad scripts generate a desk organizer for small parts. The base has a large storage area. It also holds removable part trays. An example is provided. Being a parametric design, these objects are way more useful if they are customized.
Fluval Flex 15 Gallons Light Replacement
June 4, 2022
· admin
3D Printing
object
This is a light replacement for a Fluval Flex 15 gallons aquarium. You will need a strip of WRBG LEDs. I suggest you to reuse the supplied LED controller. I've used some epoxy glue to seal the lens to the base and the wires to make it water tight. The lenses are best printed vertically. This light fixture is held using 2 thin holders using the 2 original screws. You will also need a soldering iron, some wires and shrink tubing to assemble the electronics to the LED strip.
Parametric Tool Vertical Organizer
May 28, 2022
· admin
3D Printing
object
This openScad file generates a thin tool vertical organizer. The width and the number of tools can be changed along the organizer size. It can be used to generate an organizer for any type of tools including wrenches, pliers, wood chisel and so on.
SDHC Adapter Extrusion Holder
May 21, 2022
· admin
3D Printing
object
This is a holder for the commonly available micro SD card to SDHC card adapter. You will need 2 M4 screws to install it.