ctheroux.com

Large Background Holder

March 6, 2022 · admin 3D Printing object

This is a large background holder designed for photography. It can hold a cardboard up to 0.6 mm tick.

Logitech C270 Privacy Shield

February 27, 2022 · admin 3D Printing object

This is a privacy shield that you put on your Logitech C270 webcam in order to block the lens and thus to ensure your privacy.

Google Pixel 6 Pro Tripod Adapter

February 20, 2022 · admin 3D Printing object

This is a tripod adapter for a Google Pixel 6 Pro phone including its protective case. You will need a 1/4 of a inch nut that has 11 mm between two opposite flat sides.

TronXY X5SA Run Out Sensor Spacer

February 12, 2022 · admin 3D Printing object

This is a spacer for the filament run out sensor of the TronXY X5SA. It straighten the filament between the sensor and the extruder. You will need to replace the screws with some M4 x 16 mm.

Logitech C170 Magnetic Holder

January 29, 2022 · admin 3D Printing object

This is a stand for a Logitech C170 webcam with a magnetic base. Two heights are provided: 70 mm and 150 mm.

TIL311 test program

January 23, 2022 · admin Arduino Hardware Electronic Component

TIL311 are single-digits LED hexadecimal displays with an internal four-bit latch and decoder along with the LED drivers. They come in 14 pins, dual-in-line-package. The characters are made of an 4 x 7 array of red LEDs.

Logitech C170 Privacy Shield V2

January 22, 2022 · admin 3D Printing object

This is a privacy shield that you put on your Logitech C170 webcam in order to block the lens and thus to ensure your privacy. It is sturdier than the previous design (<http://www.ctheroux.com/logitech-c170-privacy-shield/>).