CR-10 Under Bed Tray
October 18, 2020
· admin
3D Printing
object
These are trays to put under a CR-10 3D printer. The separator of one tray are 15 mm in height. For the other one, 38 mm in height which is the total height of the tray. The overall size of both trays are the same.
Hanging Open Box
October 12, 2020
· admin
3D Printing
object
This is an open box that can be hanged using 2 screws. The diameter of the head of the screw must be less than 1 cm. Its dimensions are 100 mm wide, 100 mm in height and 60 mm depth.
3D Printing Trashcan
September 27, 2020
· admin
3D Printing
object
This is a small trashcan for 3D printing. The way the cover is designed, plastic stuff in the trashcan won't spring back outside it. The trashcan is 80 mm in diameter, 100 mm in height.
Issues with Ubuntu 20.04 on AMD Ryzen 7 4800H and GeForce GTX 1660 Ti
August 4, 2020
· admin
Linux
Ubuntu 20.04
ASUS
UPDATE: Ubuntu 20.10 fixes the issues listed below.
Parametric Round Container
July 13, 2020
· admin
3D Printing
object
It is a simple parametric round container.
Wires And Probes Hanger
June 27, 2020
· admin
3D Printing
object
This object will let you suspend your wires and probes on a door. To complete this assembly, you will need a pipe or tube of 5/8 in or 16 mm in diameter. Two little screws can also be used to secure the tube to the hanger. You will need to print 2 hangers.
Drawer Dividers for Small Parts Cabinet
June 13, 2020
· admin
3D Printing
object
These are small drawer dividers. There are 2 models. One for the drawer cabinet sold by Canadian Tire. The other one is for drawer cabinet sold by Home Depot.
40 mm Extrusion Vibration Absorber
May 31, 2020
· admin
3D Printing
object
This is an anti-vibration foot for 40 mm aluminum extrusion. I had good results using semi-flexible filament. I added some anti-sliding pad. They were specifically designed for an Ender-3 printer.
Kotto Fume Extractor Stand
May 23, 2020
· admin
3D Printing
object
This is a stand for the Kotto Fume extractor that can be bought from Amazon. It raises the fume extractor by 3 cm.
Prusa MK3 Spool Holder with Bearings
May 16, 2020
· admin
3D Printing
object
This is a spool holder designed for the Prusa MK3S or any Prusa i3 printers. The dimensions of the top of the main plate shoud be 6.25mm x 40mm. It uses some 608zz bearings to reduce the friction between the spool and the holder. It makes printing very soft flexible filament easier.