TS-100 Case V2
March 18, 2024
· admin
3D Printing
object
This is a case for a TS-100 soldering iron along with 4 tips and threaded insert iron tip kit. The threaded insert iron tip kit can be bought on AliExpress (https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order\_list.order\_list\_main.52.6a7c1802hjBj2e). Lift lightly the edge of the lid to open it.
Parametric Square Spacer
March 10, 2024
· admin
3D Printing
object
This is a simple parametric square spacer.
Parametric Shaft Lock
March 9, 2024
· admin
3D Printing
object
This is an object used to lock a shaft. Its design is parametric. It is recommended to use a brass insert to hold the grub screw.
Arduino EEPROM dump utility class
March 2, 2024
· admin
Arduino
Hardware
IoT
GitHub
An Arduino EEPROM dump utility class have been added to the repository
Arduino UNO R4 Wi-Fi password connection issues
March 2, 2024
· admin
WiFI
Arduino
Hardware
Networking
IoT
Internet of Things
ASUS
The Arduino UNO R4 Wi-Fi is a great addition to the Arduino family. A fun little board to play with.
Bambu Lab Top LED Strip
February 17, 2024
· admin
3D Printing
object
This is an object that holds LED strips to be installed on the top glass of a Bambu Lab printer. Even if the light goes through the top glass, it adds enough light to improve significantly the visibility in the chamber. The goal of this design is to be simple and non-intrusive.
5 mm D Shaft Flag
February 10, 2024
· admin
3D Printing
object
This is a rotation indicator for a 5 mm D Shaft as found on Nema 17 motor for example. It is used as a diagnostic tool.
Bambu Lab AMS Riser Feet
February 5, 2024
· admin
3D Printing
object
This is an object that rises the Bambu Lab AMS by 14 mm. It was design to insert some led strip between the top printer glass and the AMS unit. You'll need four of those. It is recommended to print these using TPU 95.
XY-SK80H Buck Boost Converter Case
January 27, 2024
· admin
3D Printing
object
This is a case for a XY-SK80H Buck Boost Converter. It fits many different models having this form factor (39mm x 71.3 mm). You'll need the following to assemble it: