Parametric Shelf Bracket
November 30, 2025
· admin
3D Printing
object
This is a parametric shelf bracket. The screw holders are printed separately to prevent the brackets from splitting if the screws are overtightened. The example provided is designed for #8 wood screws, 1.5 inches in length, and a shelf depth of 5.5 inches.
Parametric Multimeter Probe Tweezer
November 23, 2025
· admin
3D Printing
object
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes.
Parametric Modular Bench Organizer V2
November 16, 2025
· admin
3D Printing
object
This is a parametric modular bench organizer generator. It allows you to create as many modules as needed, which all fit together seamlessly. A small amount of 1.75 mm filament is required for assembly.
PC4-M10 pneumatic coupler cap
November 8, 2025
· admin
3D Printing
object
This is a PC4-M10 pneumatic coupler cap.
Ikea 10 Liters 2 Spool Filament Dry Box
November 1, 2025
· admin
3D Printing
object
This is an IKEA 10-liter dual-spool filament dry box. It can hold two filament spools along with desiccant packs and a hygrometer. The filament can be fed directly from the box to your 3D printer.
Parametric Tray Riser
October 26, 2025
· admin
3D Printing
object
This is a riser for the parametric tray https://www.ctheroux.com/parametric-trays/ .
Parametric Bucket Sizing Tools
October 18, 2025
· admin
3D Printing
object
This is a set of tools designed to help size buckets for storing various objects. I created this set to measure the dimensions of boxes I needed for storage, and it turned out to be very useful.
Ikea Vattenkar Zip Tie Hooks
October 11, 2025
· admin
3D Printing
object
These are 2 sizes of zip tie hooks to hang an object under the shelves of an Ikea Vattenkar. You need to print a pair of hooks. You hang them on the opposite sides of a shelf and pass a zip tie in the lower holes.
Peg Board 3/8 inch Dowel Holder
September 28, 2025
· admin
3D Printing
object
This is a peg board holder for 3/8 inch (9.5 mm) dowel. It is designed for standard peg boards. Some glue will be required to assemble the peg hooks to the dowel holder.
Harley-Davidson Logo V2
September 14, 2025
· admin
3D Printing
object
Eight Harley-Davidson logos, I've made them for an HD motorcycle fanatic. They have either a 1.3 or an 1.5 aspect ratio.