Ikea Hemma Mounting Bracket
July 15, 2018
· admin
3D Printing
object
This is a mounting bracket for the Ikea Hemma light socket (E26). It is articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any equivalent) and the 2 matching butterfly nuts in order to assemble it.
Glass Riser For Photography
July 8, 2018
· admin
3D Printing
object
The photos of small objects are generally better when they are done on a suspended sheet of glass. Many resources from the web explain this technique.
Micro SD and SD Cards Holders
July 2, 2018
· admin
3D Printing
object
These objects are simple Micro SD and SD-card holders. They are designed to fit a small parts cabinet. The SD cards are put in the holder on its side otherwise it would be too tall for the drawers.
FLsun QQ Spool Holder (Updated)
June 15, 2018
· admin
3D Printing
object
This is a replacement spool holder for the FLsun QQ delta 3D printer.
Ikea Skogsta Screwdriver Holders
June 5, 2018
· admin
3D Printing
object
These are screwdriver holders for the Ikea Skogsta tool box. One can hold four screwdrivers. The holes are 40 mm apart from each other. This holder is designed to be placed on the right side. The one designed for the left side can hold four screwdrivers, 30 mm apart from each other. The center one can hold three screws drivers, 35 mm and 30 mm apart from each other.
Ikea Skogsta Bins
May 27, 2018
· admin
3D Printing
object
These are small bins for the Ikea Skogsta tool box. Three styles are provided: for both corners and between the corner bins. They are 60 x 80 mm. The middle ones are 60 x 70 mm.
15W Stereo Amplifier Case
May 12, 2018
· admin
3D Printing
object
This is a case to a 15W audio amplifier board that can be found on eBay, AliExpress, ... such as https://www.aliexpress.com/store/product/Hot-Sale-1pc-TDA7297-Version-B-2-15W-Digital-For-Audio-Amplifier-Board-Dual-Channel-AC/1959068\_32666077241.html?spm=2114.12010615.0.0.7a894502EdjFEn . I use this amplifier for an Asus Tinker Board.
Sink Bucket with drainage holes
April 15, 2018
· admin
3D Printing
object
This is a bucket having many drainage holes on all sides. It can be hung using the optional holder who must be separately printed and attached. It can be done using hot glue.
Tactical Strike Ammunition Reservoir Extension
January 28, 2018
· admin
3D Printing
object
This is an ammunition magazine extension for the Tactical Strike (Adventure Force). It is like a Nerf gun except that the ammunition is balls.
Fume Extractor V2
December 27, 2017
· admin
3D Printing
object
This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you'll need: