ctheroux.com

SparkFun RFID USB Reader mounting plate and drilling guide

April 10, 2015 · claude 3D Printing object

This thing contains a mounting plate and a drilling guide for the "SparkFun RFID USB Reader" (SEN-09963). The base plate is one mm thick. M2 5 mm or 1/4" 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three mm in diameter. The holes do not go through the lower layer to make it easier to print. You will have to drill them. This thing is a complement to Enclosure for the Sparkfun RFID USB Reader.

SMD Probe Case

March 25, 2015 · claude 3D Printing object

This SMD probe can be bought on Ali Express or Ebay. The inner space (available space for storage) is 47 mm x 177 mm. Both parts should be printed with 100% of infill.

Business Cards And Credit Cards Storage Box

March 21, 2015 · claude 3D Printing object

It is suitable for Norh American 2.5" x 3 " business card. In addition, credit cards also fit in this box.

Fume Extractor

March 15, 2015 · claude 3D Printing object

This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you'll need:

Aluminium Extrusion Led Strip Holder

March 7, 2015 · claude 3D Printing object

This thing is a self-adhesive strip holder who covers a 20 mm wide aluminium extrusion (like Misumi). The strip is 175 mm x 20 mm. It snaps in the extrusion groove. Stick the led strip on the holder.

Fan Holder for Aluminium Extrusion (New Design)

March 5, 2015 · claude 3D Printing object

This fan holder for aluminium extrusion replaces the previous design (Aluminium Extrusion Fan Holder). The fan is now placed on top of the Ramps instead beside it, which makes it easier to remove if needed. It uses a 60 mm fan.

Aluminium Extrusion Fan Holder

March 4, 2015 · claude 3D Printing object

This is a 60 mm fan holder to cool off a 3D Printer Ramps. This holder is design to be mounted on aluminium extrusion. A deflector is also provided to prevent the air to go on the heated bed.

Terminal Block Holder for Aluminium Extrusion

March 3, 2015 · claude 3D Printing object

These are simple terminal block holders for Misumi aluminium extrusion (or equivalent). There is a 3 to 4 mm space between the extrusion and the terminal block to run some wires.

Logic Probe Case

February 9, 2015 · claude 3D Printing object

This logic probe case is designed for the B&K Precision, Model DP 21. Nevertheless, many logic probes have the same form factor. The inner space (available space for storage) is 30 mm x 210 mm. Both parts should be printed with 100% of infill.

Another Prusa i3 Filament Guide

December 6, 2014 · claude 3D Printing object

“Another Prusa i3 Filament Guide” is now available. More details at Another Prusa i3 Filament Guide.

Tags