Harley-Davidson Logo
April 5, 2025
3D Printing
object
Description
This object is two Harley-Davidson logos, 40 mm and 60 mm, I've made for an HD motorcycle fanatic.
Support material is not required. An infill of 20% is recommended.
This object was designed using Inkscape and Bambu Lab Studio.
Files
|
Assembly-40mm.3mf |
|
Assembly-60mm.3mf |
This object is also published on the following site(s):
This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.
Copyright 2012–2026, Claude "Tryphon" Théroux