Harley-Davidson Luminous Sign
Description
This is a Harley-Davidson luminous sign measuring 24 cm by 18 cm. An optional stand is also included. To assemble the sign, you'll need approximately 100 cm of LED strip, a barrel connector, and a compatible power adapter. A few drops of glue may be needed to attach the front and back parts of the sign, as well as to secure the stand if used.
STL files for the front and back of the sign are not provided. Special slicing settings are required; please use the provided project files for best results. Support material is required only for the stand. An infill of 20% is recommended.
This object was designed using BambuLab Studio.
Files
|
Sign-front.3mf |
|
|
Sign-back.3mf |
|
|
Harley-Davidson-Stand.stl |
This object is also published on the following site(s):
This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.
Copyright 2012–2026, Claude "Tryphon" Théroux
Leave a Comment