Parametric Ikea Skadis Vertical Cylinders
March 1, 2026 · claude
3D Printing
Description
Dual vertical cylinder for the Ikea Skadis perforated board. This is a parametric design. The hooks can be glued to the cylinder body if required.
Support material touching the build plate is required. An infill of 20% is recommended.
This object was designed using openSCAD.
Files
This object is also published on the following site(s):
This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.
Copyright 2012–2026, Claude "Tryphon" Théroux
Leave a Comment