4 Litres Airtight Container Filament Name Cardholder

February 1, 2025 3D Printing object

Description

This is a device that holds cards that identify the filament stored in a 4 litres airtight container. This design is slightly curved to fit the end of the container. The size of the cards are 42.3 mm x 76 mm, which corresponds to a 1/3 of a 5 x 3 inches index card. A template that lets you print 3 cards per index card is also included.

A brim is required. It should be printed upright without support. An infill of 20% is recommended.

This object was designed using Solid Edge Community Edition.

Files

	4LAirtightContainerLabelHolder.stl
	FilamentCards.ods

This object is also published on the following site(s):

4 Litres Airtight Container Filament Name Cardholder (437)

You may request the source file(s) for this object by posting a comment below. Your email address will be used solely to deliver the requested source file(s) and for no other purpose.

By requesting the source file(s), you are granted permission to:

Share — Copy and redistribute the material, excluding the source file(s), in any medium or format.
Adapt — Remix, transform, and build upon the material.

By requesting the source file(s), you also agree to:

Give appropriate credit, provide a link to the license, and indicate whether changes were made. You may do so in any reasonable manner, provided that it does not suggest that the licensor endorses you or your use.
Not use the material for commercial purposes.
Distribute any derivative works under the same license as the original if you remix, transform, or build upon the material.
Not apply legal terms or technological measures that legally restrict others from exercising the rights granted by the license.
Not upload the source file(s) or any modified versions of the source file(s) to any website or file-sharing service.
The source file(s) are provided for your personal use only. However, you may freely upload and distribute any STL or OBJ files generated from the source file(s).

If you do not agree to all of these conditions, please do not request the source file(s).

Name

Comment

Do you agree to all these conditions?

This form cannot be submitted until 30 seconds have elapsed. You have time to read the conditions and fill out the form.