ctheroux.com

Parametric Round Container

July 13, 2020 · admin 3D Printing object

It is a simple parametric round container.

Wires And Probes Hanger

June 27, 2020 · admin 3D Printing object

This object will let you suspend your wires and probes on a door. To complete this assembly, you will need a pipe or tube of 5/8 in or 16 mm in diameter. Two little screws can also be used to secure the tube to the hanger. You will need to print 2 hangers.

Drawer Dividers for Small Parts Cabinet

June 13, 2020 · admin 3D Printing object

These are small drawer dividers. There are 2 models. One for the drawer cabinet sold by Canadian Tire. The other one is for drawer cabinet sold by Home Depot.

40 mm Extrusion Vibration Absorber

May 31, 2020 · admin 3D Printing object

This is an anti-vibration foot for 40 mm aluminum extrusion. I had good results using semi-flexible filament. I added some anti-sliding pad. They were specifically designed for an Ender-3 printer.

Kotto Fume Extractor Stand

May 23, 2020 · admin 3D Printing object

This is a stand for the Kotto Fume extractor that can be bought from Amazon. It raises the fume extractor by 3 cm.

Prusa MK3 Spool Holder with Bearings

May 16, 2020 · admin 3D Printing object

This is a spool holder designed for the Prusa MK3S or any Prusa i3 printers. The dimensions of the top of the main plate shoud be 6.25mm x 40mm. It uses some 608zz bearings to reduce the friction between the spool and the holder. It makes printing very soft flexible filament easier.

2.36mm Wire Holder

May 9, 2020 · admin 3D Printing object

This is a small wire holder. It is designed for 2.36 mm wires in diameter including its insulation.

Mini Solder Spool

May 2, 2020 · admin 3D Printing object

Soldering electronic components using a large solder spool of 454 grams or so is quite inconvenient even if it is mounted on a solder spool holder. I prefer to wind a small amount of it on a smaller spool. This is what this mini solder spool is for. It can hold about 75 grams of solder wire.

Pull Handle

April 25, 2020 · admin 3D Printing object

This is a simple pull handle. A #10 flat head screw is recommended to fasten it.

TRENDnet TK-409K KVM Holder for Ikea Ivar

April 18, 2020 · admin 3D Printing object

This is a holder for a TRENDnet TK-409K KVM. The holder is hanged on a unit side of the Ikea Ivar shelving system. The TRENDnet TK-409K is a 4 ports Keyboard/Video/Mouse switch.

Tags