ctheroux.com

FLSun Cube X-Axis Belt Tensioner

August 18, 2019 · admin 3D Printing object

The FLSun Cube 3D printer does not come with an X-Axis belt tensioner. So, I designed one. The design is simple but very effective.

FLSun Cube Bed Level Adjustment Tool

August 10, 2019 · admin 3D Printing object

This is a simple tool to adjust the level of the bed of a FLSun Cube. Likely, it can be used with other printers such as the CR-10.

FLSun Cube Bed Cable Strain Relief

August 3, 2019 · admin 3D Printing object

This is a strain relief for the heated bed cables of the FLSun Cube. A zip tie is used to fix it to the bed frame. I drilled a small hole to pass the zip tie through the bed frame.

FLSun Cube Extruder Cable Strain Relief/Holder i2

July 27, 2019 · admin 3D Printing object

This is a strain relief for the wires and the PTFE tube attached to the extruder of the FLSun Cube 3D printer. It is installed using the bolts of 2 of the linear bearing holders. The M4x16 bolts will need to be replaced by M4x20 bolts. A zip tie is used to attach the wires and the PTFE tube.

2020 Extrusion Power Supply Stabilizer

July 21, 2019 · admin 3D Printing object

This is a simple stabilizer for a power supply designed to be attached to a 2020 aluminum extrusion. This stabilizer is designed for the FLSun Cube. You will need an M3x8mm, M5x10mm, and a M5 T-NUT to install it.

FLSun Cube Extruder Cable Strain Relief/Holder

July 13, 2019 · admin 3D Printing object

This is a strain relief for the wires and the PTFE tube attached to the extruder of the FLSun Cube 3D printer. It is installed using the bolts of 2 of the linear bearing holders. The M4x16 bolts will need to be replaced by M4x20 bolts. A zip tie is used to attach the wires and the PTFE tube.

20 mm wide 135 Degrees T-Slot Angle Brackets

July 7, 2019 · admin 3D Printing object

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets.

Editing Extra large 20x4 LCD Project Box

June 30, 2019 · admin 3D Printing object

This is a project box for a large 20 x 4 LCD display. The LCD module dimensions are 146mm x 62.5mm x 20mm (5.75 inches x 2.46 inches x 0.79 inches). The viewing area is 123mm x 43mm (4.86 inches x 1.69 inches). The character size is 9.65mm x 4.57mm (0.38 inches x 0.18 inches).

Prusa i3 X-Axis Leveling Tool

May 26, 2019 · admin 3D Printing object

This is a simple tool that will help you level the X-axis of a Prusa i3. You will need to print two of this. You can use them either sitting on the Z frame or the Z motor mounts. On the main picture, they are sitting on the motor mounts. I have lowered the X-axis manually until both tools touch the lower rod of the X-axis.

Jetson Nano Base with Camera

May 20, 2019 · admin 3D Printing object

This is a simple base plate for the NVidia Jetson Nano development board along with a Raspberry PI v2.1 camera holder. It can be tilted and panned. To assemble it, you will need:

Tags