ctheroux.com

Gocheer Airbrush Stand For Model 180

November 12, 2018 · admin 3D Printing object

This is a stand for the Gocheer airbrush model 180.

Thermometer Mounting Brackets

November 4, 2018 · admin 3D Printing object

This is a mounting bracket for a small thermometer. You can buy it on AliExpress for about $1.00. I use it to monitor the temperature inside the enclosure of my FLSun QQ (https://www.thingiverse.com/thing:3165164). Holes are provided to screw it to something. Nevertheless, I used hot glue to mount it on my FLSun QQ. The hole in the bracket is 26 mm x 45 mm.

3D Printing Tool Caddy

October 28, 2018 · admin 3D Printing object

Yes, another 3D Printing Tool Caddy! It contains only the essential tools. It can hold:

FLsun QQ Enclosure

October 21, 2018 · admin 3D Printing object

The way the FLsun QQ is designed makes it easy to enclose it. Printing ABS is possible with this enclosure.

Ender Z End-Stop Spacer

October 14, 2018 · admin 3D Printing object

Put this spacer between the X-Axis and the Z end-stop. It is useful when adding a 3 mm glass on the bed of an Ender-2 or Ender-3 3D printer. It is a lot easier to use this spacer than to move the Z end-stop up. A drop of hot glue is used to maintain it in place.

Power Supply Fan Deflector

October 8, 2018 · admin 3D Printing object

This is a simple power supply fan deflector to redirect the air flow. A few drops of hot glue is used to install it.

PTFE Tube Cutting Guide

September 30, 2018 · admin 3D Printing object

These are 4mm and 6mm PTFE tube cutting guides. Use a very sharp razor blade.

Twin Deep Buckets for Ikea Ivar Shelving System

September 23, 2018 · admin 3D Printing object

These are deep twin buckets to be hanged on the side unit of the Ikea Ivar shelving system. The buckets themselves are 12.5 cm (L) x 4 cm (W) and 8 cm (D). Support is needed. Infill of 20% or above is suggested.

Twin Deep Partitionned Buckets for Ikea Ivar Shelving System

September 16, 2018 · admin 3D Printing object

These are deep partitioned twin buckets to be hanged on the side unit of the Ikea Ivar shelving system. The buckets themselves are 12.5 cm (L) x 4 cm (W) and 8 cm (D). Support is needed. Infill of 20% or above is suggested.

Twin Small Buckets for Ikea Ivar Shelving System

September 10, 2018 · admin 3D Printing object

This is twin small buckets to be hanged on the side unit of the Ikea Ivar shelving system. The buckets themselves are 12.5 cm (L) x 4 cm (W) and 4 cm (D). Support is needed. Infill of 20% or above is suggested.

Tags