ctheroux.com

TRENDnet TK-207K KVM Holder for Ikea Ivar

August 27, 2018 · admin 3D Printing object

This is a holder for a TRENDnet TK-207K KVM. The holder is hanged on a unit side of the Ikea Ivar shelving system. The TRENDnet TK-207K is a 2 ports Keyboard/Video/Mouse switch.

Ivar FlashLight Holder 2

August 19, 2018 · admin 3D Printing object

This is a flashlight holder who is installed on the side unit of the Ivar shelving system. The hole holding the flashlight is 4.5 cm in diameter. It fits flashlight that uses D-cell batteries. You will also need 2 #4-40, 3/8" bolts and the matching nuts. Support material is not needed. An infill of 40% is recommended.

Ikea Ivar Small Bucket

August 12, 2018 · admin 3D Printing object

This is a small bucket to be hanged on the side unit of the Ikea Ivar shelving system. The bucket is 12.5 cm (L) x 4 cm (W) and 4 cm (D). Support is needed. Infill of 20% or above is suggested.

Ivar FlashLight Holder 1

August 6, 2018 · admin 3D Printing object

This is a flashlight holder that is installed on the side unit of the Ivar shelving system. The hole that holds the flashlight 4.5 cm in diameter. It fits flashlight that uses D cell batteries.

Ivar Side Unit Drilling Template

July 30, 2018 · admin 3D Printing object

This is a simple drilling template for the Ivar Shelving System. It is used to drill a hole between two vertical holes of a side unit.

Ikea Hemma Mounting Bracket

July 15, 2018 · admin 3D Printing object

This is a mounting bracket for the Ikea Hemma light socket (E26). It is articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any equivalent) and the 2 matching butterfly nuts in order to assemble it.

Glass Riser For Photography

July 8, 2018 · admin 3D Printing object

The photos of small objects are generally better when they are done on a suspended sheet of glass. Many resources from the web explain this technique.

Micro SD and SD Cards Holders

July 2, 2018 · admin 3D Printing object

These objects are simple Micro SD and SD-card holders. They are designed to fit a small parts cabinet. The SD cards are put in the holder on its side otherwise it would be too tall for the drawers.

FLsun QQ Spool Holder (Updated)

June 15, 2018 · admin 3D Printing object

This is a replacement spool holder for the FLsun QQ delta 3D printer.

Ikea Skogsta Screwdriver Holders

June 5, 2018 · admin 3D Printing object

These are screwdriver holders for the Ikea Skogsta tool box. One can hold four screwdrivers. The holes are 40 mm apart from each other. This holder is designed to be placed on the right side. The one designed for the left side can hold four screwdrivers, 30 mm apart from each other. The center one can hold three screws drivers, 35 mm and 30 mm apart from each other.

Tags