ctheroux.com

PN532 Breakout Board Mounting Plate

May 30, 2014 · admin 3D Printing object

Specially designed for Adafruit's PN532 Breakout Board Mounting Plate (Product 364).

Enclosure For The Sparkfun RFID USB Reader

May 12, 2014 · admin 3D Printing object

This is an enclosure for the Sparkfun's RFID USB Reader (SEN-09963).

20 mm wide 90 Degrees T-Slot Angle Brackets

April 28, 2014 · admin 3D Printing object

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets.

Parametric Pipe/Rod/Tube Adapter

April 16, 2014 · admin 3D Printing object

This openScad file is a pipe, tube or rod adapter. It lets you fit together two pipes of different diameters. Edit the file. Modify the first pipe diameter, the second pipe diameter, the adapter thickness and the total height. Render the file and you will end up with the adapter.

Tape Roll Holder Revisited

April 11, 2014 · admin 3D Printing object

This is a simple holder for a Tape Roll. This design is much more robust than the previous one (Tape Roll Holder). You simply need to screw it to a vertical surface. You can use it for other purposes obviously.

Mounting plate for Arduino UNO/Duemilanove/Diecimila

April 6, 2014 · admin Arduino 3D Printing object

A simple mounting plate for the Arduino UNO, Duemilavone, Diecimila, Freeduino or any other compatible boards. Use #4-40 screws to mount the board on the mounting plate.

40 MM Angle Bracket With Adjustable Foot

March 11, 2014 · admin 3D Printing object

This is an adjustable foot for 40 mm T-Slot aluminium extrusion combined with a 90 degree bracket. It was design, especially for a 3D printer. It can serve other purposes obviously. You will likely need 4 feet and 4 angle brackets. Furthermore, you will need four threaded rods of either 8mm or 5/16" in diameter. They must be at least 50 mm length. Finally, to be able to assemble the feet, you will need to thread the brackets and the feet.

40 MM T-Slot Adjustable Foot

March 7, 2014 · admin 3D Printing object

This is an adjustable foot for 40 mm T-Slot aluminium extrusion. It was design, especially for a 3D printer. It can serve other purposes obviously. You will likely need 4 feet, 2 right and 2 left supports. Furthermore, you will need four threaded rods of either 8mm or 5/16" in diameter. They must be at least 50 mm length. Finally, to be able to assemble the feet, you will need to thread the supports and the feet.

40 MM T-Slot Angle Bracket

March 5, 2014 · admin 3D Printing object

40 mm T-Slot Angle Bracket.

20 MM T-Slot End Caps

March 4, 2014 · admin 3D Printing object

20 mm x 20 mm, 20 mm x 40 mm and 20 mm x 60 mm T-Slot end caps.

Tags