ctheroux.com

Frequency Counter Case

April 27, 2024 · claude 3D Printing object

This is a case for a frequency counter widely available on discount Chinese sites such as https://www.aliexpress.com/item/1005006203286595.html?spm=a2g0o.order\_list.order\_list\_main.66.61291802TVURcl . Some assembly is required. 4 M3 x 8 mm hex cap...

TS-100 Case V2

March 18, 2024 · claude 3D Printing object

This is a case for a TS-100 soldering iron along with 4 tips and threaded insert iron tip kit. The threaded insert iron tip kit can be bought on AliExpress (https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order\_list.order\_list\_main...

Parametric Square Spacer

March 10, 2024 · claude 3D Printing object

This is a simple parametric square spacer.

Parametric Shaft Lock

March 9, 2024 · claude 3D Printing object

This is an object used to lock a shaft. Its design is parametric. It is recommended to use a brass insert to hold the grub screw.

Parametric Scoop

February 24, 2024 · claude 3D Printing object

This parametric model creates scoops.

Bambu Lab Top LED Strip

February 17, 2024 · claude 3D Printing object

This is an object that holds LED strips to be installed on the top glass of a Bambu Lab printer. Even if the light goes through the top glass, it adds enough light to improve significantly the visibility in the chamber. The goal of this design is to...

5 mm D Shaft Flag

February 10, 2024 · claude 3D Printing object

This is a rotation indicator for a 5 mm D Shaft as found on Nema 17 motor for example. It is used as a diagnostic tool.

Bambu Lab AMS Riser Feet

February 4, 2024 · claude 3D Printing object

This is an object that rises the Bambu Lab AMS by 14 mm. It was design to insert some led strip between the top printer glass and the AMS unit. You'll need four of those. It is recommended to print these using TPU 95.

XY-SK80H Buck Boost Converter Case

January 27, 2024 · claude 3D Printing object

This is a case for a XY-SK80H Buck Boost Converter. It fits many different models having this form factor (39mm x 71.3 mm). You'll need the following to assemble it:

Ikea Vattenkar Cable Holder

January 13, 2024 · claude 3D Printing object

This is a cable holder for the Ikea Vattenkar organizer. A M3 x 6 mm nut and bolt or equivalent are required for assembly.

Tags