Ikea 10 Liters 2 Spool Filament Dry Box

November 1, 2025 3D Printing object

Description

This is an IKEA 10-liter dual-spool filament dry box. It can hold two filament spools along with desiccant packs and a hygrometer. The filament can be fed directly from the box to your 3D printer.

You will need some glue, four PC4-M10 pneumatic connectors, eight 608ZZ bearings, some PTFE tube, and two 8 mm (5/16 in) rods, each 160 mm long.

The model is relatively large, and individual components are provided in case your printer cannot accommodate the full assembly in a single print. If printed in separate parts, you will need glue to assemble them.

I place a desiccant container in the center of each spool. I use the 50 mm version of these containers, which can be found here: https://www.printables.com/model/65922-silica-gel-spool-container

The hygrometer I use can be found here: https://www.aliexpress.com/item/1005008841100994.html

Support material is not required except for the rollers. An infill of 20% is recommended.

This object was designed using Solid Edge Community Edition.

Files

	FinalAssembly.stl
	RollerBase.stl
	RollerBase.stl
	BearingHolder608ZZ.stl
	CenterBrace.stl
	SideBrace.stl
	RodCap.stl
	PC4-M10-Nut-5mm.stl
	PC4-M10-Bolt-7mm.stl
	FilamentCardHolder.stl
	DrillingGuide.stl
	SideBraceForSquareHygrometer.stl

This object is also published on the following site(s):

The source files are available

You may request the source file(s) for this object by posting a comment below. Your email address will be used solely to deliver the requested source files and for no other purpose.

By requesting the source files, you are granted permission to:

Share — Copy and redistribute the material, excluding the source files, in any medium or format.
Adapt — Remix, transform, and build upon the material.

By requesting the source files, you also agree to:

Give appropriate credit, provide a link to the license, and indicate whether changes were made. You may do so in any reasonable manner, provided it does not suggest that the licensor endorses you or your use.
Not use the material for commercial purposes.
Distribute any derivative works under the same license as the original if you remix, transform, or build upon the material.
Not apply legal terms or technological measures that legally restrict others from exercising the rights granted by this license.
Not upload the source files or modified versions of the source files to any website or file-sharing service. They are provided for your personal use only. However, you may freely upload and distribute any STL or OBJ files generated from them.

If you do not agree to all of these conditions, please do not request the source files.