Parametric Multimeter Probe Tweezer
November 23, 2025
3D Printing
object
Description
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes.
Support material is required on the build plate only. An infill of 30% is recommended.
This object was designed using openSCAD.
Files
|
|
ParametricMultimeterProbeTweezer.stl |
|
ParametricMultimeterProbeTweezer.scad |
This object is also published on the following site(s):
Copyright 2012–2026, Claude "Tryphon" Théroux