Parametric Shelf Bracket

November 30, 2025 3D Printing object

Description

This is a parametric shelf bracket. The screw holders are printed separately to prevent the brackets from splitting if the screws are overtightened. The example provided is designed for #8 wood screws, 1.5 inches in length, and a shelf depth of 5.5 inches.

Support material touching the build plate is required. An infill of 30% is recommended.

This object was designed using openSCAD.

Files

	ParametricShelfBracket.stl
	ParametricShelfBracket_MergedCode.scad

This object is also published on the following site(s):

Thingiverse
Printables
MakerWorld

This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.