L'Antre du Tryphon
Dual vertical cylinder for the Ikea Skadis perforated board. This is a parametric design. The hooks can be glued to the cylinder body if required.
Support material touching the build plate is required. An infill of 20% is recommended.
This object was designed using openSCAD.
Printable Files
| | Two cylinder example |
| | openSCAD scripts |
This object is also published on the following site(s):
* Thingiverse
* Prusa Printers
* MakerWorld
Copyright 2012-2026 by Claude “Tryphon” Théroux