L'Antre du Tryphon
This is a modular Single Board Computers enclosure for up to 4 devices. The device cards are held vertically. This design let you service one card without having to remove the cards on top of it like in the previous design (https://www.thingiverse.com/thing:4700165). This new design can still hold up to 4 cards containing Raspberry Pi, Arduino’s, ESP32, hard drives, etc. My server case contains a firewall, a DNS and DHCP server and my IOT management system.
The whole case is powered using a single 12V power brick. The cooling of the content of the case is provided using a single 120 mm 12V computer fan.
You may need some cards not provided yet. Feel free to contact me if you need some cards. As of today, cards are available for a Raspberry Pi 3/4 and buck converters. It holds up to 3 XL4005 based buck converter to supply the Raspberry Pis.
A card is 12 cm by 15 cm. The distances between the cards is 3 cm.
Support material is required for the outer shell bottom (CaseBottom.stl) and top (CaseTop.stl) parts. An infill of 20% is sufficient for all parts except for the top (CardCageTop.stl) and bottom (CardCageBottom.stl) card cage parts which requires an infill of 40%.
BOM for my usage is:
Card cage
Power card
Fan module:
Raspberry PI Cards:
Outer shell:
Assembly:
This object was designed using Solid Edge Community Edition.
Printable Files
| Case Bottom |
| Case Top |
| Front Panel |
| Back Filter Grid |
| Back Fan Grid |
| Sides |
| Card Cage Bottom |
| Card Cage Top |
| Posts |
| Power Supply Plate |
| Raspberry PI Plate |
This object is also published on the following site(s):
* Prusa Printers
* Thingiverse
The source files are available:
You may request the source file(s) of this object. Ask for it by posting a comment below. Your email address will NOT be used for any other purposes than delivering you the source files. By doing so:
You are free to:
* | Share — copy and redistribute the material except the source files in any medium or format |
* | Adapt — remix, transform, and build upon the material |
You agree to:
* | give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. |
* | not use the material for commercial purposes |
* | distribute your contributions under the same license as the original if you remix, transform, or build upon the material |
* | not apply legal terms or technological measures that legally restrict others from doing anything the license permits. |
* | not upload the source files or modified source files on any sites. They are made available for your personal usage only. Nevertheless, you are allowed to upload the resulting STL or OBJ files. |
If you do not agree to any of these conditions, do NOT request the source files.
Copyright 2012-2022 by Claude “Tryphon” Théroux