L'Antre du Tryphon
This is a case to a 15W audio amplifier board that can be found on eBay, AliExpress, … such as https://www.aliexpress.com/store/product/Hot-Sale-1pc-TDA7297-Version-B-2-15W-Digital-For-Audio-Amplifier-Board-Dual-Channel-AC/1959068_32666077241.html?spm=2114.12010615.0.0.7a894502EdjFEn . I use this amplifier for an Asus Tinker Board.
You will also need a mini toggle switch, a barrel power jack and a 1/8″ stereo jack and some 22 gauge wire. The hole for the power jack is 8.25 mm. The hole for the audio jack is 6.25 mm.
The board is held in the case with one 8 mm, M3 screw on the front. Since the screws in the back are difficult to reach, using 20 mm, M3 screws help. Then with tweezers, it is possible to put the nut on top of the screw. The heads of the screws are on the bottom of the case.
This object was designed using Fusion 360
Printable Files
This object is also published on the following site(s):
* Thingiverse
The source files are available:
You may request the source file(s) of this object. Ask for it by posting a comment below. Your email address will NOT be used for any other purposes than delivering you the source files. By doing so:
You are free to:
| * | Share — copy and redistribute the material except the source files in any medium or format |
| * | Adapt — remix, transform, and build upon the material |
You agree to:
| * | give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. |
| * | not use the material for commercial purposes |
| * | distribute your contributions under the same license as the original if you remix, transform, or build upon the material |
| * | not apply legal terms or technological measures that legally restrict others from doing anything the license permits. |
| * | not upload the source files or modified source files on any sites. They are made available for your personal usage only. Nevertheless, you are allowed to upload the resulting STL or OBJ files. |
If you do not agree to any of these conditions, do NOT request the source files.
Copyright 2012-2020 by Claude “Tryphon” Théroux
Hi! May i have source files, to use a different power button and add fan?
Thank you in advance
Hi,
you’ll receive a link to download the files in the next hour.
Claude
Hi! I need source files, i want to use a different power button and speaker outputs. thanks in advance
Hi, I will send you the source file during the weekend. Regards, Claude