L'Antre du Tryphon
This is a 5-1/4 inch round speaker enclosure. The total speaker depth is 50 mm.
You’ll need 4 x M3 brass inserts, 4 x M3 x 4 mm screws, 1 x terminal block for the speaker connections with the related screws and nuts and finally some wires to hook the speaker to the terminal block. A dab of glue is also required to mount the front grill.
You will need to print 1 of each for each speaker. Support is not required. An infill of 20% is recommended.
This object was designed using Solid Edge Community Edition.
Printable Files
| | Speaker base |
| | Front Grill |
This object is also published on the following site(s):
* Prusa Printers
* Thingiverse
The source files are available:
You may request the source file(s) of this object. Ask for it by posting a comment below. Your email address will NOT be used for any other purposes than delivering you the source files. By doing so:
You are free to:
| * | Share — copy and redistribute the material except the source files in any medium or format |
| * | Adapt — remix, transform, and build upon the material |
You agree to:
| * | give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. |
| * | not use the material for commercial purposes |
| * | distribute your contributions under the same license as the original if you remix, transform, or build upon the material |
| * | not apply legal terms or technological measures that legally restrict others from doing anything the license permits. |
| * | not upload the source files or modified source files on any sites. They are made available for your personal usage only. Nevertheless, you are allowed to upload the resulting STL or OBJ files. |
If you do not agree to any of these conditions, do NOT request the source files.
Copyright 2012-2021 by Claude “Tryphon” Théroux