L'Antre du Tryphon
This is a set of tools designed to help size buckets for storing various objects. I created this set to measure the dimensions of boxes I needed for storage, and it turned out to be very useful.
Support material is not required, although some is included within the lid model. These supports will need to be cut to allow the cover holders to move freely. An infill of 20% is recommended.
This object was designed using openSCAD.
Printable Files
| | Tool set of 120 x 120 mm |
| | Tool set generator source code |
This object is also published on the following site(s):
* Thingiverse
* Prusa Printers
* MakerWorld
Copyright 2012-2025 by Claude “Tryphon” Théroux