L'Antre du Tryphon
This is a parametric cylindrical objects container with lid generator. This object was primarily design to hold a set of round magnets.
Support material is not required. An infill of 15% is recommended.
This object was designed using OpenSCAD.
Printable Files
| | Arbitrary Cylinder Count Container With Overlapped Lid |
| | 200 magnets container holding 6 mm x 2 mm magnets |
This object is also published on the following site(s):
* Prusa Printers
* Thingiverse
Copyright 2012-2023 by Claude “Tryphon” Théroux