L'Antre du Tryphon
This is a parametric dowel bracket. The screw holders are printed separately to prevent the bracket from splitting if the screws are overtightened.
The example provided is designed for #8 wood screws, 1.5 inches in length, with a 12 cm distance between the center of the dowel and the back of the bracket. The DowelStopper parameter controls whether the bracket has a closed side or remains open.
Support material is not required. An infill of 30% is recommended.
This object was designed using openSCAD.
Printable Files
| | Closed dowel bracket, right side |
| | Closed dowel bracket, left side |
| | Open dowel bracket |
| | openSCAD script |
This object is also published on the following site(s):
* Thingiverse
* Prusa Printers
* MakerWorld
Copyright 2012-2025 by Claude “Tryphon” Théroux