L'Antre du Tryphon
This is a parametric shelf bracket. The screw holders are printed separately to prevent the brackets from splitting if the screws are overtightened. The example provided is designed for #8 wood screws, 1.5 inches in length, and a shelf depth of 5.5 inches.
Support material touching the build plate is required. An infill of 30% is recommended.
This object was designed using openSCAD.
Printable Files
| | 5.5 inches shelf depth, #8, 1.5 inches wood screws |
| | openSCAD source code |
This object is also published on the following site(s):
* Thingiverse
* Prusa Printers
* MakerWorld
Copyright 2012-2025 by Claude “Tryphon” Théroux