40 mm Angle Bracket With Adjustable Foot
 |
|||||
 |
 |
 |
|||
Description
This is an adjustable foot for 40 mm T-Slot aluminium extrusion combined with a 90 degree bracket. It was design, especially for a 3D printer. It can serve other purposes obviously.
You will likely need 4 feet and 4 angle brackets. Furthermore, you will need four threaded rods of either 8mm or 5/16″ in diameter. They must be at least 50 mm length. Finally, to be able to assemble the feet, you will need to thread the brackets and the feet.
Printable Files
|
40 mm Angle Bracket With Adjustable Foot |
|
Printer feet |
Copyright 2012-2014 by Claude Théroux
1 thought on “40 mm Angle Bracket With Adjustable Foot”
Comments are closed.