L'Antre du Tryphon

This is an anti-vibration foot for the Prusa i3 MK3S. It should be printed with TPU for best results. You will need to print 4 of these! Support material is

This is a 5-1/4 inch round speaker enclosure. The total speaker depth is 50 mm. The screw holes for the speaker are 141 mm diagonally. You’ll need 4 x M3

This is a set of thickness gauges. The supplied thickness are 1, 2, 4, 8, 16 and 32 mm. Thicknesses from 1 up to 63 mm may be achieved by

This is a small caddy to hold up to 6 soldering iron tips, up to 3 spools of solder wire and a tip cleaner. The tip cleaner has a diameter

This is a stand when used with some DIN Rails makes a useful electronic prototyping rig. You will be able to move your prototypes easily with it. Feet are also