Archive

For March, 2015

SMD Probe Case

No Comments

“SMD Probe Case” is now available. More details at SMD Probe Case.

Business Cards And Credit Cards Storage Box

No Comments

“Business Cards And Credit Cards Storage Box” is now available. More details at Business Cards And Credit Cards Storage Box.

Octoprint and Cura Disk Image for the Raspberry Pi (Version 2015-03-15)

1 Comment

Cura integrated with Octoprint brings your 3D printer to the next level. You can download from HERE a fully functional image of Cura integrated with Octoprint. Simply copy this image to an SD-card of 4GB or more. Instruction to copy an image on an SD-card is given on this PAGE. You will need to unzip this file prior copying the image to the SD-card.

A 4 GB SD-card will give you about 1.2 GB of free space to upload your models after expanding the filesystem. Be aware that some folders are hidden. Make sure you display them.

This image is based on the following:

  • http://docstech.net/OctoPiMirror/2015-01-31-octopi-0.11.0.zip
  • https://github.com/foosel/OctoPrint/wiki/Cura-Integration (2015-03-15 version)
  • https://github.com/Ultimaker/CuraEngine.git (2015-03-15 version)

This image is fully functional. Nevertheless, the following might need to be done.

  1. Logon to the Raspberry Pi. Issue the command sudo raspi-config. You may wish to expand the filesystem (Option 1) and change the memory split to 64 (Option 8 > A3).
  2. Modify the settings as needed on another computer with Cura installed. Save them as CuraConfig.ini by going to File > Save Profile. Replace the content of /home/pi/Cura/config/CuraConfig.ini (on the SD-card) with the content of the saved CuraConfig.ini file.
  3. Copy the file preferences.ini located on the computer (located in ~/.cura/[version]/ if using Linux) to /home/pi/.cura/dev/preferences.ini on the SD-car.
  4. Set up a fixed IP address to the Raspberry Pi. Instruction can be found HERE.
  5. Change the default password for the user pi. Instruction can be found HERE.
  6. Enable the access control of Octoprint. To do so, edit /home/pi/.octoprint/config.yaml. Set accessControl: enabled to true and server: firstRun to true and reboot the Raspberry Pi running Octoprint.

Fume Extractor

No Comments

“Fume Extractor” is now available. More details at Fume Extractor.

Aluminium Extrusion Led Strip Holder

No Comments

“Aluminium Extrusion Led Strip Holder” is now available. More details at Aluminium Extrusion Led Strip Holder.

Fan Holder for Aluminium Extrusion (New Design)

No Comments

“Fan Holder for Aluminium Extrusion (New Design)” is now available. More details at Fan Holder for Aluminium Extrusion (New Design).

Aluminium Extrusion Fan Holder

No Comments

“Aluminium Extrusion Fan Holder” is now available. More details at Aluminium Extrusion Fan Holder.

Terminal Block Holder for Aluminium Extrusion

No Comments

“Terminal Block Holder for Aluminium Extrusion” is now available. More details at Terminal Block Holder for Aluminium Extrusion.

Blue Taste Theme created by Jabox