Fume Extractor V2
Description
This is a solder fume extractor. This is an improvement over the version I’ve made a few years ago that can be found at https://www.thingiverse.com/thing:724350 . Only the base is changed. I lowered it and made the base larger to improve its stability.
This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you’ll need:
- 2 x carbon filters of 130mm x 130mm x 10mm.
- 1 x 120 mm 12V computer fan
- 1 x KCD1-101 switch
- 1 x DC barrel power jack like the PRT-00119 from Sparkfun
- 4 x 6-32 screws of 1.5″ in length (38 mm)
- 4 x 6-32 nuts
- Some electrical wires
You also need a 12V power adapter with a 5.5 x 2.1 mm plug to power it.
You should not need support material to print it.
Printable Files
Fume Extractor Stand V2 | |
Fume Extractor Head | |
Filter Holder | |
120 mm |
Copyright 2012-2017 by Claude Théroux