Parametric Multimeter Probe Tweezer
 |  |
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes.
Support material is required on the build plate only. An infill of 30% is recommended.
This object was designed using openSCAD.
Printable Files
| | Tweezers for 1 cm in diameter probes |
 | openSCAD script |
This object is also published on the following site(s):
* Thingiverse
* Prusa Printers
* MakerWorld
Copyright 2012-2025 by Claude “Tryphon” Théroux