Ikea 10 Liters 2 Spool Filament Dry Box
 |  |  |  |  |  |
 |  |  |  |  |  |
 |  |  |  |  |
This is an IKEA 10-liter dual-spool filament dry box. It can hold two filament spools along with desiccant packs and a hygrometer. The filament can be fed directly from the box to your 3D printer.
You will need some glue, four PC4-M10 pneumatic connectors, eight 608ZZ bearings, some PTFE tube, and two 8 mm (5/16 in) rods, each 160 mm long.
The model is relatively large, and individual components are provided in case your printer cannot accommodate the full assembly in a single print. If printed in separate parts, you will need glue to assemble them.
I place a desiccant container in the center of each spool. I use the 50 mm version of these containers, which can be found here: https://www.printables.com/model/65922-silica-gel-spool-container
The hygrometer I use can be found here: https://www.aliexpress.com/item/1005008841100994.html
Support material is not required except for the rollers. An infill of 20% is recommended.
This object was designed using Solid Edge Community Edition.
Printable Files
This object is also published on the following site(s):
* Thingiverse
* Prusa Printers
* MakerWorld
The source files are available:
You may request the source file(s) of this object. Ask for it by posting a comment below. Your email address will NOT be used for any other purposes than delivering you the source files. By doing so:
You are free to:
| * | Share — copy and redistribute the material except the source files in any medium or format |
| * | Adapt — remix, transform, and build upon the material |
You agree to:
| * | give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. |
| * | not use the material for commercial purposes |
| * | distribute your contributions under the same license as the original if you remix, transform, or build upon the material |
| * | not apply legal terms or technological measures that legally restrict others from doing anything the license permits. |
| * | not upload the source files or modified source files on any sites. They are made available for your personal usage only. Nevertheless, you are allowed to upload the resulting STL or OBJ files. |
If you do not agree to any of these conditions, do NOT request the source files.
Copyright 2012-2025 by Claude “Tryphon” Théroux