L'Antre du Tryphon

This is a parametric shelf bracket. The screw holders are printed separately to prevent the brackets from splitting if the screws are overtightened. The example provided is designed for #8

This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended.

This is a parametric modular bench organizer generator. It allows you to create as many modules as needed, which all fit together seamlessly. A small amount of 1.75 mm filament

This is a PC4-M10 pneumatic coupler cap. Support material is not required. An infill of 50% is recommended. This object was designed using openSCAD. Printable Files    PC4-M10 coupler cap

This is an IKEA 10-liter dual-spool filament dry box. It can hold two filament spools along with desiccant packs and a hygrometer. The filament can be fed directly from the