Parametric Scoop
![Parametric Scoop](http://www.ctheroux.com/wp-content/uploads/2024/02/parts-1.jpg)
This parametric model creates scoops.
Support material is optional. An infill of 20% is recommended.
This object was designed using openSCAD.
Printable Files
![]() | Parametric Scoop model |
![]() | 15mm x 15mm x 25 mm Scoop |
![]() | 30mm x 15mm x 25 mm Scoop |
This object is also published on the following site(s):
* Prusa Printers
* Thingiverse
Copyright 2012-2024 by Claude “Tryphon” Théroux
1 thought on “Parametric Scoop”