L'Antre du Tryphon

  These objects replace the poor stock nozzle cooling system provided by FLsun. You will need 2 x M3-20 mm bolts and nuts to mount the fan along with the

  These are various cylindrical containers. Each container holds 10 bearings. For each size, two parts are required: the base and the lid. There are containers for the following bearings:

  The stock Flsun Cube extruder is quite bad. I replaced it with an all-metal one available almost everywhere. The holder didn’t fit anymore. So I designed this one. Also

  Wire spools of various sizes. The main picture is the 60 x 40 mm wire spool. It holds about 20 meters (10 meters of 2 conductors wire) of 26