L'Antre du Tryphon

This is a case for a frequency counter widely available on discount Chinese sites such as https://www.aliexpress.com/item/1005006203286595.html?spm=a2g0o.order_list.order_list_main.66.61291802TVURcl . Some assembly is required. 4 M3 x 8 mm hex cap screws

This is a case for a TS-100 soldering iron along with 4 tips and threaded insert iron tip kit. The threaded insert iron tip kit can be bought on AliExpress

This is a simple parametric square spacer. Support material is not required. An infill of 15% is recommended. This object was designed using openSCAD. Printable Files    Parametric Square Spacer

This is an object used to lock a shaft. Its design is parametric. It is recommended to use a brass insert to hold the grub screw. Support material is not

An Arduino EEPROM dump utility class have been added to the repository https://github.com/ctheroux/Arduino/ . A typical output looks like:

The Arduino UNO R4 Wi-Fi is a great addition to the Arduino family. A fun little board to play with. The Arduino UNO R4 Wi-Fi could not connect to my

This parametric model creates scoops. Support material is optional. An infill of 20% is recommended. This object was designed using openSCAD. Printable Files    Parametric Scoop model    15mm x

This is an object that holds LED strips to be installed on the top glass of a Bambu Lab printer. Even if the light goes through the top glass, it

This is a rotation indicator for a 5 mm D Shaft as found on Nema 17 motor for example. It is used as a diagnostic tool. Support material is not

This is an object that rises the Bambu Lab AMS by 14 mm. It was design to insert some led strip between the top printer glass and the AMS unit.

This is a case for a XY-SK80H Buck Boost Converter. It fits many different models having this form factor (39mm x 71.3 mm). You’ll need the following to assemble it:

This is a cable holder for the Ikea Vattenkar organizer. A M3 x 6 mm nut and bolt or equivalent are required for assembly. Support material is not required. An

This is a bottle stabilizer parametric model. For now, it contains the configuration for Robert Oster and Noodle’s ink bottles. Support material is not required. An infill of 20% is